Customization: | Available |
---|---|
After-sales Service: | Online Technical Support, Onsite Installation |
Warranty: | 10 Years |
Still deciding? Get samples of US$ 5/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
(1) Biaxial Plastic Tensile Geogrids
(2) Uniaxial Plastic Tensile Geogrids
(3) HDPE Geocells
(4) Polypropylene Filament Non woven Geotextile
(5) HDPE LDPE LLDPE Waterproof Geomembrane
(6) Plastic drainage boards
Technical index
Soft permeable pipe: JC 937-2004 | ||||||||
Project | Index | |||||||
FH50 | FH80 | FH100 | FH150 | FH200 | FH250 | FH300 | ||
Allowable deviation of outer diameter | ±2.0 | ±2.5 | ±3.0 | ±3.5 | ±4.0 | ±6.0 | ±8.0 | |
Steel wire | Wire diameter,mm>= | 1.6 | 2.0 | 2.6 | 3.5 | 4.5 | 5.0 | 5.5 |
Wire spacing, laps/m, >= | 55 | 40 | 34 | 25 | 19 | 19 | 17 | |
Thickness of protective layer,mm,>= | 0.3 | 0.34 | 0.36 | 0.38 | 0.42 | 0.60 | 0.60 | |
Note: The diameter of the steel wire can be increased and the number of turns per meter can be reduced, but it should meet the requirements for pressure resistance and flatness. | ||||||||
Longitudinal tensile strength,KN/5cm,>= | 1.0 | |||||||
Longitudinal elongation,%,>= | 12.0 | |||||||
Transverse tensile strength,KN/5cm,>= | 0.8 | |||||||
Transverse Elongation,%,>= | 12.0 | |||||||
Bursting strength of ball top,KN,>= | 1.1 | |||||||
CBR bursting strength,KN,>= | 2.8 | |||||||
Permeability coefficient K20,cm/s,>= | 0.1 | |||||||
Equifinal aperture O95,mm | 0.06~0.25 | |||||||
Note: Only one of the ball bursting strength test and CBR bursting strength test is required. Due to the small area of the filter cloth, the ball bursting strength test should be used for FH50; CBR bursting strength test is recommended for FH 80 and above. | ||||||||