| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support, Onsite Installation |
| Warranty: | 10 Years |
|
Still deciding? Get samples of US$ 5/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
(1) Plastic drainage boards
(2) Biaxial Plastic Tensile Geogrids
(3) PET Biaxial Plastic Welded Geogrids
(4) Biaxial Glassfiber Geogrids
(5) Polypropylene Filament Non woven Geotextile
(6) HDPE Geocell
| Waterproof board: TB/T3360.1-2014 | |||||||
| No. | Item | Index | |||||
| EVA | ECB | PE | |||||
| 1 | Tensile property | Tensile strength at break(MPa) | >=18 | >=17 | >=18 | ||
| Elongation at break(%) | >=650 | >=600 | >=600 | ||||
| 2 | Tear strength( KN/m) | >=100 | >=95 | >=95 | |||
| 3 | Impermeability(0.3MPa/24h) | No-leakage | No-leakage | No-leakage | |||
| 4 | Low temperature bending(-35ºC) | No cracks | No cracks | No cracks | |||
| 5 | Heating expansion amount | Extend(mm) | <=2 | <=2 | <=2 | ||
| Shrink(mm) | <=6 | <=6 | <=6 | ||||
| 6 | Hot air aging(80ºC×168h) | Tensile strength at break(MPa) | >=16 | >=14 | >=15 | ||
| Elongation at break(%) | >=600 | >=550 | >=550 | ||||
| 7 | Alkali resistance (saturated Ca(OH)2 solution×168h) | Tensile strength at break(MPa) | >=17 | >=16 | >=16 | ||
| Elongation at break(%) | >=600 | >=600 | >=550 | ||||
| 8 | Artificial aging | Breaking tensile strength retention rate(MPa) | >=80 | >=80 | >=80 | ||
| Retention rate of elongation at break(%) | >=70 | >=70 | >=70 | ||||
| 9 | Puncture strength | Thickness1.5mm(N) | >=300 | >=300 | >=300 | ||
| Thickness2.0mm(N) | >=400 | >=400 | >=400 | ||||
| Thickness2.5mm(N) | >=500 | >=500 | >=500 | ||||
| Thickness3.0mm(N) | >=600 | >=600 | >=600 | ||||
| GB/T 18173.1-2012 | |||||||||||
| Project | Vulcanized rubber type |
Non-vulcanized rubber type |
Resin type | ||||||||
| JL1 | JL2 | JL3 | JF1 | JF2 | JF3 | JS1 | JS2 | JS3 | |||
| Tensile strength, MPa |
Normal temper ature (23ºC)≥ |
7.5 | 6.0 | 6.0 | 4.0 | 3.0 | 5.0 | 10 | 16 | 14 | |
| Normal temper ature (60ºC)≥ |
2.3 | 2.1 | 1.8 | 0.8 | 0.4 | 1.0 | 4 | 6 | 5 | ||
| Elong ation at break,% |
Normal temper ature (23ºC)≥ |
450 | 400 | 300 | 400 | 200 | 200 | 200 | 550 | 500 | |
| Low temper ature (-20ºC)≥ |
200 | 200 | 170 | 200 | 100 | 100 | - | 350 | 300 | ||
| Tear strength, KN/m≥ |
25 | 24 | 23 | 18 | 10 | 10 | 40 | 60 | 60 | ||
| Impermeability, 30min |
0.3 MPa without leakage |
0.3 MPa without leakage |
0.2 MPa without leakage |
0.3 MPa without leakage |
0.2 MPa without leakage |
0.2 MPa without leakage |
0.3 MPa without leakage |
0.3 MPa without leakage |
0.3 MPa without leakage |
||
| Low tempera ture bending |
No crack at -40ºC |
No crack at -30ºC |
No crack at -30ºC |
No crack at -30ºC |
No crack at -20ºC |
No crack at -20ºC |
No crack at -20ºC |
No crack at -35ºC |
No crack at -35ºC |
||
| Heating expan sion capacity, mm |
Elonga tion,≤ |
2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | |
| Shrink age,≤ |
4 | 4 | 4 | 4 | 6 | 10 | 6 | 6 | 6 | ||
| Hot air aging (80ºC× 168h) |
Tensile strength retention rate,%≥ |
80 | 80 | 80 | 90 | 60 | 80 | 80 | 80 | 80 | |
| Elong ation at break retention rate,%≥ |
70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | ||
| Alkali resist ance (satur ated Ca(OH)2 solution 23ºC× 168h) |
Tensile strength retention rate,%≥ |
80 | 80 | 80 | 80 | 70 | 70 | 80 | 80 | 80 | |
| Elong ation at break retention rate,%≥ |
80 | 80 | 80 | 90 | 80 | 70 | 80 | 90 | 90 | ||
| Ozone aging (40ºC× 168h) |
Elong ation of 40%, 500×10-8 |
No crack |
- | - | No crack | - | - | - | - | - | |
| Elong ation of 20%, 200×10-8 |
- | No crack | - | - | - | - | - | - | - | ||
Elong ation of 20%, 100×10-8 |
- | - | No crack | - | No crack | No crack | - | - | - | ||
| Artificial climate aging |
Tensile strength retention rate,%≥ |
80 | 80 | 80 | 80 | 70 | 80 | 80 | 80 | 80 | |
| Elong ation at break retention rate,%≥ |
70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | ||
| Bond stripping strength (slice to slice) |
Standard test condition, N/mm |
1.5 | |||||||||
Soaking retention rate (23ºC× 168h), %≥ |
70 | ||||||||||
Appearance quality:
1. There are no joints within the specified length.
2. The surface is flat, the edges are neat, and there are no cracks, mechanical damage, creases, holes, bubbles, and abnormal adhesion that affect
the use.The thickness is uniform.
3. The appearance color is the natural color of the material, without any added pigments or fillers.
4. Under conditions that do not affect use, the depth of surface dents shall not exceed 5% of the thickness.
Classification of EVA waterproof membrane:
| Classification | Code | Main raw materials | ||||
| Homogeneous sheet | Vulcanized rubber | JL1 | EPDM rubber | |||
| JL2 | Rubber plastic blending | |||||
| JL3 | Neoprene rubber, chlorosulfonated polyethylene, chlorinated polyethylene, etc | |||||
| Non vulcanized rubber |
JF1 | EPDM rubber | ||||
| JF2 | Rubber plastic blending | |||||
| JF3 | Chlorinated polyethylene | |||||
| Resins | JS1 | PVC, etc | ||||
| JS2 | Ethylene vinyl acetate copolymer, polyethylene, etc | |||||
| JS3 | Blending of ethylene vinyl acetate copolymer with modified asphalt, etc | |||||
| Composite sheet | Vulcanized rubber | FL | (EPDM, butyl, chloroprene rubber, chlorosulfonated polyethylene, etc.)/fabric | |||
| Non vulcanized rubber | FF | (Chlorinated polyethylene, EPDM, butyl, chloroprene rubber, chlorosulfonated polyethylene, etc.)/fabric | ||||
| Resins | FS1 | PVC/fabric | ||||
| FS2 | (Polyethylene, ethylene vinyl acetate copolymer, etc.)/Fabric | |||||
| Self-adhesive sheet | Vulcanized rubber | ZJL1 | EPDM/self-adhesive material | |||
| ZJL2 | Rubber plastic blend/self-adhesive material | |||||
| ZJL3 | (Neoprene rubber, chlorosulfonated polyethylene, chlorinated polyethylene)/self-adhesive material | |||||
Q1. Can you do OEM?
A1. Yes.of course.We can produce the products as per your request. If you can offer samples to us,it will bemore convenient.
Q2. If I want to order a small quantity goods,can you do it?
A2. If the product you need we have stock available,that would be great,you can choose the instock goods. but if not, don't worry, we can take your
order with our other clients' order to be produced together.But it needs to wait some time .
Q3. Can I get a sample from your company?Should I pay for the express fee?
A3. If you can accept our available sample,we can offer free sample to you. If you want a customized sample,we can renegotiate the cost. About the
express fee,please offer a freight collected account and pay for the express fee by your side. After confirming your order, the sample's freight cost will
be deducted from your order's total cost.
Q4. How will you follow my order?
A4. When the goods are started to produce,we will take photos for the goods and send it to you. If you find any production deficiencies,please contact
us to correct it. We will keep in touch with you in the whole production by e-mail or instant messaging, like Skype/Viber/WhatsApp, you can get the
latest news about your order. After the goods are finish,we will take photos for the goods and packing to you before shipping.
Q5. What is your exporting countries?
A5. We have good sales performance and win good international reputation in more than 15 Countries and regions,such as Japan, America,
Australia,Russia, Canada,Middle East and so on.
){kind=link}